Quality Assurance Aircraft Structures Inspector

Job Description:

Description:This occupation requires the inspection of structural/electrical/plumbing assemblies, sub-assemblies, bench assemblies, functional installations, and components for workmanship and conformance to requirements; the final assembly and mating of airplane structural components; installations of Functional units and systems; shakedown and operational checkout of the completed airplane and component assemblies from production and prior to flight line. Rejects unacceptable items and prepares documentation for their disposition.
Inspects the sealing operations performed on new or completely stripped, modified and resealed integral wing tanks in tank seal building, including all related structural and functional installations contained for conformance to applicable designs and specifications and rejects and dispositions unacceptable items.
Inspects final washing, priming, painting, and internal trimming operations performed on completed production and modification aircraft to assure that such operations are accomplished in conformance with applicable engineering prints, disposition data, and process specifications. Must have current Inspection certifications as required by Company policy and Quality Control Manual. Inspects for alignment, attachments, workmanship, completeness, and conformance to installation drawings, engineering, inspection and other specifications or requirements the final assembly and mating of airplane structural components such as outer to inner wing, power plant to wing, fore to aft fuselage sections and empennage to fuselage, and the attachment and rigging of items such as elevators, flaps, ailerons, and stabilizers. Inspects for alignment, continuity, workmanship and conformance to the required specifications, the final hookup and installation of functional units of the airplane such as electrical, rigging, power plant, armament, plumbing and hydraulic systems, including operational tests and checkouts. Conducts a full compartment by compartment shakedown of a completed airplane for completeness and accuracy of installations; alignment, freedom of movement, clearances, tension, throw limits and torque of functional systems; completeness, workmanship, attachment, and conformance to specifications of required interior, cabin, power plant, and exterior accessories, identifications, and other attachments.
Inspects and approves the final operational checkout of the completed airplane under simulated flight conditions prior to transfer to flight line including check for adherence to latest design changes, and customer requirements. Inspects jig loading and mating, framing, skinning, riveting, and out-of-jig shakedown of structural assemblies, sub-assemblies, and bench assemblies for workmanship and conformance with requirements. Inspects such assemblies as fuselage and center sections, outer and inner wings, and any attached structural installations for alignment, contour, material, finish and shortages; checks rivets, bolts, screws, and fasteners for cracks, edge distance, and size. Inspects functional installations such as electrical, hydraulic, plumbing and rigging units and components for workmanship, clearance, tension, coding, finish, alignment, routing, location, and conformance with other similar requirements. Inspects and approves bonding and pressure testing operations. Inspects spot-welded parts and assemblies for workmanship, correct assembly, contour, cracks, faults, edge distance, and spots in radii.
Stamps or otherwise approves acceptable items; rejects unacceptable items; prepares documentation for disposition of unacceptable items.
Performs inspection of integral wing tanks and related structural installations and modification for conformance to applicable designs and specifications. Inspects the tank and installations for such factors as completeness, workmanship, freedom from foreign matter, and sealability. Inspects aircraft during and after priming and final painting operations.
Basic Qualifications:
Candidates are required to have the following minimum levels of experience and/or training:

Four years of experience, that includes any combination of the following:

1. Military aircraft structures quality assurance experience.

2. Aircraft assembly, structures, electrical installation or hydraulics installation experience.

3. One-year experience in application of aircraft finishes may offset one year of the four-year requirement.

4. Completion of the LMASC Chattahoochee Technical Institute Production Inspection Training Course of 300-400 hours may offset one year of the four-year requirement.

5. Passing score of the ASQ Certified Inspector examination may offset two years of the four-year requirement.

Must successfully pass the Lockheed Martin facilitated entrance Q&MS Inspection examination prior to employment. Must be able to demonstrate ability to enter and satisfy associated requirements within the Human Factors Assessment prior to employment.
Clearance Level: None
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the worlds most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.

With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.

If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: AERONAUTICS COMPANY
Relocation Available: Possible
Career Area: QA/Test and Inspection
Type: Full-Time
Shift: Second

Job Ident #: 81027045760

Company Details

Lockheed Martin

6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/

Lockheed Martin Corporation is an American global aerospace, defense, security and advanced technologies company with worldwide interests. It was formed by the merger of Lockheed Corporation with Martin Marietta in March 1995. It is headquartered in North...

Benefits:
TBD

(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)

Job Info

Location

Marietta, Georgia, United States

Type

Permanent

Company Details

Lockheed Martin

6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/