Technician

Job Description:

Description:IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, Vandenburg Air Force Base or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position.

Fabricate, visually verify and rework all varieties and complexities of electronic assemblies and sub-assemblies for engineering development, qualification and production purposes. Perform operations such as component lead forming, soldering, trimming, flux removal, wire wrap, wire routing and securing wires, and related
mechanical assembly of electrical chassis.
Work from schematics, blueprint wiring lists, engineering sketches, and other
information Integrate planning documentation, specification requirements and design
changes into the process of building electronic equipment. Use best shop practice and
available sources of information to determine sequence rework of operations.

Perform operations verification checks including electrical continuity, resistance, in-process checks, and other operator verifications as required.

Perform all necessary encapsulation operations, such as bonding, filleting, priming,
conformal coating, embedding, and impregnating missile assemblies.

Recommend improvements to product and process quality, cost efficiency, and to the
improvement of tooling and other factors affecting quality and productivity in the
workplace.
Basic Qualifications:
Must be certified in one-touch solder and solder inspection. Certification may be required in all other skills necessary to manufacture electronic assemblies including operations verification of in-process and completed stages of sub-assemblies and assemblies of flight and non-flight hardware.

Must possess a thorough understanding of and the ability to utilize Manufacturing and
Product Assurance Process Standards, specification requirements, rejection
documentation, waivers and operations inspection requirements to manufacture
acceptable hardware. Must be able to read and understand Ordnance Development
specifications, weapon specifications, Design Standards and other related requirements.

Must be able to calculate and measure using shop mathematics, including fractions and
decimals. Must be able to perform critical alignment requirements and to validate installation. Use all the tools, equipment and facilities necessary to perform assigned tasks.

Must be familiar with all applicable electronics fabrication, tooling, equipment, hand and
measurement tools, such as gauges.
Must show proficiency in reading comprehension as well as ability to follow instructions and to report progress on work assignments.

Normally requires a minimum of five years directly related experience. Qualification for this classification will require the successful completion of a practical demonstration of the work performed in the classification.
Desired Skills:
Must have Cable Harness Fabrication experience and be able to obtain a Cable Harness Certification. Certification may be required in all other skills necessary to manufacture electronic assemblies including operations verification of in-process and completed stages of sub-assemblies and assemblies of non-flight hardware, this includes a Solder Certification. Must possess a thorough understanding of and the ability to utilize Manufacturing and Product Assurance Process Standards, specification requirements. Must be able to read and comprehend documentation; ie: Drawings, Parts List and Wirelist. Use all the tools, equipment and facilities necessary to perform assigned tasks.
Must be familiar with all applicable electronics fabrication, tooling, equipment, hand and
measurement tools, such as gauges & crimp tools. Must be able to calculate and measure using shop mathematics, including fractions and
decimals.
Clearance Level: None
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: Standard Monday to Friday 40 hour work week

The base range for this position in California is $25.35 - $43.20.
Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. The wage range and benefits summary is a general guideline and is governed by the applicable collective bargaining agreement when extending an offer.
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the worlds most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.

With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.

If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: SPACE
Relocation Available: No
Career Area: Technicians
Type: Full-Time
Shift: First

Must have Cable Harness Fabrication experience and be able to obtain a Cable Harness Certification. Certification may be required in all other skills necessary to manufacture electronic assemblies including operations verification of in-process and completed stages of sub-assemblies and assemblies of non-flight hardware, this includes a Solder Certification. Must possess a thorough understanding of and the ability to utilize Manufacturing and Product Assurance Process Standards, specification requirements. Must be able to read and comprehend documentation; ie: Drawings, Parts List and Wirelist. Use all the tools, equipment and facilities necessary to perform assigned tasks.
Must be familiar with all applicable electronics fabrication, tooling, equipment, hand and
measurement tools, such as gauges & crimp tools. Must be able to calculate and measure using shop mathematics, including fractions and
decimals.

Job Ident #: 81187169072

Company Details

Lockheed Martin

6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/

Lockheed Martin Corporation is an American global aerospace, defense, security and advanced technologies company with worldwide interests. It was formed by the merger of Lockheed Corporation with Martin Marietta in March 1995. It is headquartered in North...

Benefits:
TBD

(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)

Job Info

Location

Sunnyvale, California, United States

Type

Permanent

Company Details

Lockheed Martin

6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/